Cuticle lifter professional Bionessa B.32
The Bionessa B.32 Kopytko was created with the perfect manicure in mind. The preparation of cuticles is one of the most important stages of the procedure, which is why it is so important to choose the perfect hoof. Perfectly moved cuticles have a positive effect on the appearance and aesthetics of the nail and the final effect of the manicure. The hoof was made of the highest quality surgical steel characterized by strength and hardness. Each of the working parts was developed by hand with attention to every detail. Kopytko has two different tips ensuring versatile use. Kopytko B.32 perfectly fits each hand, guaranteeing the highest comfort of work thanks to its slim and ergonomic shape.
Professional manicure last:
length of the oblique working edge 15 mm (+/- 0.5 mm),
width of the rounded working edge 9 mm (+/- 0.5 mm),
hoof length 130 mm (+/- 1 mm),
handle thickness 5 mm (+/- 0.5 mm),
manually sharpened edges,
matte - polished finish,
made of surgical steel,
product intended for disinfection and sterilization in an autoclave.
Proper use and storage of Bionessa tools:
Use tools only for the purposes for which they are intended
Always store tools with the blades pointing up
avoid dropping or hitting the tools to prevent damaging the cutting edges
store tools in a dry place and in a dedicated packaging. The air in the room should be dry and the tools should not be stored in foil wraps. This restricts the access of air and can generate water vapor condensation, which is very harmful to steel.
tools should be handled very carefully. Some mechanical damage is invisible to the naked eye. Blades, tips and mechanisms require special care.
Proper maintenance of Bionessa tools:
Remember that the correct cleaning, disinfection and sterilization process should be carried out each time the tools are used.
Cleaning: Clean tools thoroughly from any dust, tissue, nails or hair residues with a brush. Then rinse instruments with distilled water *.
* Use distilled water for cleaning to avoid discoloration and rusting of tools. Tap water contains minerals that can deposit on instruments and adversely affect the sterilization effect.
Disinfection: The disinfection process can be carried out in a vessel filled with a disinfecting preparation or solution, or in an ultrasonic cleaner with the use of agents designed for this purpose. Remember that the tools are completely immersed in the solution. After disinfection is finished, remove the tools and leave them to dry completely *.
* Cleaning / disinfecting solutions should be prepared according to the instructions on the preparation leaflet. We especially recommend that the concentration of the solution be respected - this has both hygienic and economic consequences. Too high a concentration may damage the tools, while too low a concentration will not disinfect selected microorganisms.
Sterilization: The sterilization process of the instruments takes place in an autoclave. The recommended method of sterilization is overpressure steam sterilization at 134 ° Celsius (should not exceed 200 °). The sterilization process should be carried out in accordance with the instructions indicated on the device to be sterilized. Remember to open all instruments so that each element of the instrument is sterilized. Before sterilization, lubricate the moving mechanisms of the tools with a special preparation. For steam sterilization, we recommend the use of a water-soluble lubricant.