Cuticle nippers Bionessa professional B.23.3
Bionessa B.23.3 cutters are a perfect product for people who value comfort and convenience. The shape of the handles ensures a secure grip and the highest control of every movement during work. Thanks to the double spring, every cut is smooth and smooth. Hand-sharpened cutting edges with a length of 3 mm allow for very precise and quick processing of cuticles without puffs and cuts. Clippers are made of the highest quality surgical steel, resistant to disinfection and sterilization.
Professional cuticle nippers.
blade length 3 mm (+/- 0.5 mm),
cutter length 106 mm (+/- 1 mm),
manually sharpened cutting edges,
made of surgical steel,
do not dull and do not rust,
product intended for disinfection and sterilization in an autoclave.
Proper use and storage of Bionessa tools:
Use tools only for the purposes for which they are intended
Always store tools with the blades pointing up
avoid dropping or hitting the tools to prevent damaging the cutting edges
Store tools in a dry place and in a dedicated packaging. The air in the room should be dry and the tools should not be stored in foil wraps. This restricts the access of air and can generate water vapor condensation, which is very harmful to steel.
tools should be handled very carefully. Some mechanical damage is invisible to the naked eye. Blades, tips and mechanisms require special care.
Proper maintenance of Bionessa tools:
Remember that the correct cleaning, disinfection and sterilization process should be carried out each time the tools are used.
Cleaning: Clean tools thoroughly from any dust, tissue, nails or hair residues with a brush. Then rinse instruments with distilled water *.
* Use distilled water for cleaning to avoid discoloration and rusting of tools. Tap water contains minerals that can deposit on instruments and adversely affect the sterilization effect.
Disinfection: The disinfection process can be carried out in a vessel filled with a disinfectant preparation or solution, or in an ultrasonic cleaner with the use of agents designed for this purpose. Remember that the tools are completely immersed in the solution. After disinfection is finished, remove the tools and let them dry completely *.
* Cleaning / disinfecting solutions should be prepared according to the instructions on the preparation leaflet. We especially recommend that the concentration of the solution be respected - this has both hygienic and economic consequences. Too high a concentration may damage the tools, while too low a concentration will not disinfect selected microorganisms.
Sterilization: The tools are sterilized in an autoclave. The recommended method of sterilization is overpressure steam sterilization at 134 ° Celsius (should not exceed 200 °). The sterilization process should be carried out in accordance with the instructions indicated on the device to be sterilized. Remember to open all instruments so that each element of the instrument is sterilized. Before sterilization, lubricate the moving mechanisms of the tools with a special preparation. For steam sterilization, we recommend the use of a water-soluble lubricant.
top of page
bottom of page